AXIS Q6032 PTZ Dome Network Camera
Video and Audio
Image Settings
Autofocus enabled -
Automatic focusing is enabled by default. If the focus position is changed manually using the focus bar,
autofocus will be disabled even if enabled here. In this case, use the PTZ control panel to enable autofocus, see
PTZ Controls, on page
10
. If required, the focus control can be disabled under
PTZ > Advanced > Controls
.
Noise reduction -
Set to
On
to enable noise reduction. Noise reduction may increase the amount of motion blur.
Stabilizer -
When monitoring environments that are subject to vibrations (e.g. traf
fi
c control), images may appear to be unsteady.
Select the frequency,
High
or
Low
, that gives the best improvement in image quality. Enabling the stabilizer will limit the digital
zoom. See the online help
for more information.
Image freeze on PTZ -
Select
All movements
to freeze the image while the camera is moving during a pan, tilt or zoom operation.
Once the camera reaches its new position, the view from that position is shown.
Presets
freezes the image only when the camera
moves between preset positions.
Overlay
Overlays are used to provide extra information, for example for forensic video analysis or during product installation and
con
fi
guration. Overlays are superimposed over the video stream.
An overlay text can display the current date and time, or a text string. When using a text string, modi
fi
ers can be used to display
information such as the current bit rate or the current frame rate. For information about available modi
fi
ers, see
File Naming &
Date/Time Formats
in the online help
.
To enable overlays:
1. Go to
Video & Audio > Video Stream
and select the
Image
tab.
2. To include an overlay image, select
Include overlay image at the coordinates
. The overlay image must
fi
rst be uploaded to
the Axis product, see
Overlay Image
.
3. To include date and time, select
Include date
and
Include time
.
4. To include a text string, select
Include text
and enter the text in the
fi
eld. Modi
fi
ers can be used, see
File Naming &
Date/Time Formats
in the online help
.
5. Select the text color, the text background color and the position of the overlay.
6. Click
Save
.
To modify the date and time format, go to
System Options > Date & Time
. See
Date & Time, on page 41
.
Overlay Image
An overlay image is a static image superimposed over the video stream. The image, for example company logo, is used to provide
extra information or to mask a part of the image.
Since it is static, the position and size of an overlay image will remain the same regardless of resolution and Pan/Tilt/Zoom
movements. To set up a dynamic mask, which will always mask the speci
fi
ed part of monitored area, see
Privacy Mask
.
To use an overlay image, the image must
fi
rst be uploaded to the Axis product:
1. Go to
Video & Audio
>
Overlay Image
.
2. Click
Browse
and browse to the
fi
le.
3. Click
Upload
.
4. Select the image to use from the
Use overlay image
list.
5. Click
Save
.
19