Axis Q6000-E Mk II, User Manual

Page: 25 / 60

AXIS Q6000-E Mk II PTZ Network Camera
About PTZ (Pan Tilt Zoom)
About PTZ (Pan Tilt Zoom)
About the control queue
Note
• The administrator can enable and disable PTZ controls for selected users.
• To identify different users in the viewer group, cookies must be enabled on the client.
• The Control queue polltime is measured in seconds. For more information see the online help .
The administrator can set up a queue for PTZ controllers from PTZ > Control Queue . Once set up, the PTZ Control Queue buttons
appear in the live view window offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.
A user who belongs to a group (see Users on page 40 ) with a higher PTZ priority can go before other users in the queue and take
control of the product. The order of priority is as follows:
1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will be
removed from the queue 60 seconds after the last PTZ control command.
2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see About events on
page 33 ). The event will immediately be placed first in the queue except when an administrator is in control.
3. Operator — Same as administrator but with lower priority
4. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed
on to the next viewer in queue.
About Remote Gatekeeper
Gatekeeper monitors an area. When a motion detection triggers the Gatekeeper, the PTZ camera moves to a preset position.
About the Remote Gatekeeper setup
Only one gatekeeper can be created under Setup > PTZ > Remote Gatekeeper . Additional gatekeepers must be created as separate
action rules, see How to create additional gatekeepers on page 26 .
If you re-configure Remote Gatekeeper, this overwrites the previous configuration.
There are three steps to set up a gatekeeper:
1. Set up preset positions for each channel. You can create and save up to a maximum of 9 preset positions per channel. A
minimum of one preset position is required for the gatekeeper to work. The presets configured for each channel will be
added on the connected PTZ camera. See
How to set up preset positions on page 25
2. To define where movement should trigger the gatekeeper for the channel, set up motion detection window. See How to
set up motion detection window on page 26
3. Configure the action rule. See How to configure the gatekeeper action rule on page 26
How to set up preset positions
1. Select channel.
2. Click in the Channel image to draw a rectangle for the preset position. The connected PTZ camera moves to this position.
3. To adjust the pan and tilt positions, click in the PTZ Network Camera image. For more adjustments, click Fine tune
remote PTZ by clicking here .
4. Enter a name in the Current position field. This name appears in the Available positions drop-down list.
25