Axis Q3709-PVE User Manual Download Page 38

Page: 38 / 59

AXIS Q3709-PVE Network Camera

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•

To start a continuous recording, see

page 39

•

To set up action rules, see

page 33

•

To access recordings, see

Find Recordings on page 38

•

To play recordings, see

Play Recording on page 39

•

To export a recording as a video clip, see

Export Video Clip on page 39

•

To configure camera controlled storage, see

Storage on page 49

Find Recordings

Recordings made to the network share can be accessed from the

Recordings > List

page. The page lists all recordings and shows each

recording’s start date and time, duration and the event that triggered the recording.

The recording list also displays the name of the channel (left, centre, or right) on which the recording was made.

Note

The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is
configured to use a time zone different from the local time zone, make sure to configure the

Recording time

filters according

to the product’s time zone. Date and time settings are configured under

System Options > Date & Time

, see

Date & Time

on page 43

To find a recording, follow these steps:

1. Go to

Recordings > List

2. To reduce the number of recordings displayed, select the desired options under

Filter

Recording time

– List recordings that started between the

From

and

times.

Event

– List recordings that were triggered by a specific event. Select

continuous

to list continuous recordings.

Storage

– List recordings from a specific storage device.

Sort

– Specify how recordings should be sorted in the list.

Results

– Specify the maximum number of recordings to display.

3. To apply the filters, click the

Filter

button. Some filters may take a long time to complete.

4. The recordings are displayed in the

Recording

list.

To play a recording, select the recording and click

Play

. See also

Play Recording on page 39

To view detailed information about a recording, select the recording and click

Properties

To export a recording or a part of a recording as a video clip, select the recording and click

Export

. See also

Export Video Clip on

page 39

To remove a recording from the storage device, select the recording and click

Remove

Summary of Contents for Q3709-PVE




























































Search results

Summary of Contents for Q3709-PVE

Reviews:

Related manuals for Q3709-PVE

Brands by name

Popular brands

Axis Q3709-PVE, User Manual

Search results

Summary of Contents for Q3709-PVE

Reviews:

Related manuals for Q3709-PVE

Brands by name

Popular brands