AXIS Q3538–SLVE Dome Camera
Configure your device
Set up rules for events
You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text while the device is recording.
To learn more, check out our guide
Get started with rules for events
Send an email if the camera casing is opened
This example shows how to set up an event, that sends an email notification, if the camera casing is opened.
Add an email recipient:
1. Go to
System > Events
and add a recipient.
2. Enter a name for the recipient.
3. In the list of different recipient types, select
.
4. Enter the email address that you want to send the emails to.
5. Enter the email address and all other required information for the server you want to send the emails from.
6. Click
Save
.
Create the rule:
1. Go to
System > Events
and add a rule.
2. Enter a name for the rule.
3. In the list of conditions, under
Device status
, select
Casing open
.
4. In the list of actions, under
Notifications
, select
Send notification to email
.
5. In the list of recipients, select the recipient you created.
6. Enter a
Subject
and a
Message
for your email.
7. Click
Save
.
Trigger an action
1. Go to
System > Events
and add a rule. The rule defines when the device will perform certain actions. You can set
up rules as scheduled, recurring, or manually triggered.
2. Enter a
Name
.
3. Select the
Condition
that must be met to trigger the action. If you specify more than one condition for the rule, all of the
conditions must be met to trigger the action.
4. Select which
Action
the device should perform when the conditions are met.
Note
If you make changes to an active rule, the rule must be turned on again for the changes to take effect.
Record video when the camera detects an object
This example explains how to set up the camera to start recording to the SD card five seconds before it detects an object and to
stop one minute after.
Make sure that AXIS Object Analytics is running:
9
