Axis Q1941-E, User Manual

Page: 36 / 58

AXIS Q1941-E PT Mount Thermal Network Camera
About recordings
About recordings
The Axis product can be configured to record video continuously or according to an action rule:
• To start a continuous recording, see page 37 .
• To set up action rules, see page 31 .
• To access recordings, see How to find recordings on page 36 .
• To play recordings, see How to play recordings on page 36 .
• To export a recording as a video clip, see How to export a video clip on page 37 .
• To configure camera controlled storage, see Storage on page 47 .
How to find recordings
Recordings stored on the SD card or network share can be accessed from the Recordings > List page. The page lists all recordings on
the storage device and shows each recording’s start date and time, duration and the event that triggered the recording.
Note
The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is
configured to use a time zone different from the local time zone, make sure to configure the
Recording time filters according
to the product’s time zone. Date and time settings are configured under System Options > Date & Time , see Date & Time
on page 41 .
To find a recording, follow these steps:
1. Go to Recordings > List .
2. To reduce the number of recordings displayed, select the desired options under Filter :
Recording time – List recordings that started between the From and To times.
Event – List recordings that were triggered by a specific event. Select continuous to list continuous recordings.
Storage – List recordings from a specific storage device.
Sort – Specify how recordings should be sorted in the list.
Results – Specify the maximum number of recordings to display.
3. To apply the filters, click the Filter button. Some filters may take a long time to complete.
4. The recordings are displayed in the Recording list.
To play a recording, select the recording and click Play . See also How to play recordings on page 36 .
To view detailed information about a recording, select the recording and click Properties .
To export a recording or a part of a recording as a video clip, select the recording and click Export . See also How to export a
video clip on page 37 .
To remove a recording from the storage device, select the recording and click Remove .
How to play recordings
Recordings on the SD card or network share can be played directly from the Axis product’s web pages.
36