AXIS Q1798-LE Network Camera
Additional settings
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
Set up network storage
To store recordings on the network, you need to set up your network storage.
1. Go to
Settings > System
>
Storage
.
2. Click
Setup
under
Network storage
.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click
Connect
.
Record and watch video
To record video you must first set up network storage, see
Set up network storage on page 16
, or have an SD card installed.
Record video
1. Go to the live view.
2. To start a recording, click
Record
. Click again to stop the recording.
Watch video
1. Click
Storage > Go to recordings
.
2. Select your recording in the list and it will play automatically.
Set up rules and alerts
You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text while the device is recording.
Trigger an action
1. Go to
Settings > System > Events
to set up an action rule. The action rule defines when the device will perform certain
actions. Action rules can be setup as scheduled, recurring, or for example, triggered by motion detection.
2. Select what
Trigger
must be met to trigger the action. If you specify more than one trigger for the action rule, all
of them must be met to trigger the action.
3. Select which
Action
the device should perform when the conditions are met.
Note
If you make changes to an active action rule, you have to restart the action rule for the changes to take effect.
Note
If you change the definition of a stream profile that is used in a rule, you have to to restart all the rules that use that
stream profile.
16
