
AXIS PoE Midspans 8P/16P
Page
3
ENG
LISH
Before you begin
Package Contents
• PoE Midspan
• Mains cable
• Two 19-inch rack mounting brackets
• Four M4 x 8mm Philips flat head screws
• AXIS warranty statement
• Four rubber feet
• Manual
Precautions
Please read the following carefully before installing and connecting the system to a power source.
• Only qualified and trained service personnel (in accordance with IEC 60950 and AS/NZS 3260)
should install, replace, or service the equipment. Install the system in accordance with Country,
National, or the U.S. National Electric Code if you are in the United States.
• The building where this product is used requires a fuse or circuit breaker no larger than 15 A for
120 VAC (U.S.A.) or 10 A, 230 VAC (international). The building facility must protect the AXIS
PoE Midspans 8P/16P from over current or short-circuits.
• Read the Midspan Hardware Setup procedure before connecting the AXIS PoE Midspans 8P/16P
to a power source (including power cord requirements).
• Do not operate the product in an area that exceeds the maximum recommended ambient tem-
perature of 104 ºF/ 40 ºC to avoid overheating the AXIS PoE Midspans 8P/16P. Allow at least 3
to 4 inches/ 7.6 to 10.2 cm clearance around all ventilation openings.
• Do not stack the chassis on any other equipment to support its weight. Shelf mounted equip-
ment requires a stable and durable surface. Do not push or pull on the Midspan while installing.
• The AXIS PoE Midspans 8P/16P consist of two rows of "Data” and "Data & Power" ports. The
ports use RJ-45 data sockets. Connect only RJ-45 data cables to these sockets. Do not connect
telephone cables into these ports.
• Do not work on the AXIS PoE Midspans 8P/16P system or connect or disconnect cables, when
there is lightning.
• The AC or DC plug/socket combination must be accessible at all times, as it is the main discon-
nect device to the product.
• Before servicing the product, always disconnect the product from its AC source.
• Abide by appropriate national laws and regulations when it comes to discarding this product.