Axis P7214, Installation Manual

Page: 13 / 60

AXIS P7214 Installation Guide Page 11
EN
GLIS
H
Resetting to the factory default settings
This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect the power from the AXIS P7214, or if PoE is used disconnect the network cable.
2. Press and hold the Control button and reconnect power or the network cable if PoE is used.
3. Keep the Control button pressed until the Status indicator displays amber (this may take up to
15 seconds).
4. Release the Control button. When the Status indicator displays green (which can take up to 1
minute) the process is complete and the video encoder has been reset.
5. Re-assign the IP address, using one of the methods described in this document.
It is also possible to reset parameters to the original factory default settings via the web interface.
For more information, please see the online help or the user’s manual.
Further information
The user’s manual is available from the Axis Web site at www.axis.com
Warranty
For information about Axis' product warranty and thereto related information, please see
www.axis.com/warranty
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your AXIS
P7214. To see the currently installed firmware version, see the About web page.