Axis P7210 User Manual Download Page 46

Page: 46 / 52

AXIS P7210 Video Encoder

Troubleshooting

Multicast H.264 only

accessible by local clients

Check if your router supports multicasting, or if the router settings between the client and the

product need to be con

gured. The TTL (Time To Live) value may need to be increased.

Poor rendering of H.264

images

Color depth set incorrectly on clients. Set to 16–bit or 32–bit color.

If text overlays are blurred, or if there are other rendering problems, you may need to enable

Advanced Video Rendering fromv the Video tab in the AMC Control Panel.

Ensure that your graphics card is using the latest driver. The latest drivers can usually be

downloaded from the manufacturer’s website.

Color saturation is different

in H.264 and Motion JPEG

Modify the settings for your graphics adapter. Refer to the adapter’s documentation for more

information.

Lower frame rate than

expected

Reduce the number of applications running on the client computer.

Limit the number of simultaneous viewers.

Check with the network administrator that there is enough bandwidth available.

Check in the AMC Control Panel (H.264 tag) that video processing is NOT set to

Decode only

key frames

Lower the image resolution.

Why do I not get maximum

frames per second?

See

Performance considerations, on page 50

The maximum frames per second is dependent on the utility frequency (60/50 Hz) of the Axis

product. See

Technical Speci

cations, on page 49

Image degeneration

Decrease the GOV length. Go to

Video & Audio > Video Stream

and select the

H.264 tab

to modify the GOV length.

Status and Network indicator LEDs are

ashing red rapidly

Hardware failure

Contact your Axis reseller.

Status indicator LED is

ashing red and the product is inaccessible

rmware upgrade has

been interrupted or the

rmware has otherwise been

damaged

See

Emergency recovery procedure, on page 44

No images displayed on web page

Problems with AXIS Media

Control (

Internet Explorer

only

)

To enable the updating of video images in Internet Explorer, set the browser to allow ActiveX

controls. Also, make sure that AXIS Media Control is installed on your computer.

Installation of additional

ActiveX component

restricted or prohibited

Con

gure the Axis product to use a Java applet for updating video images in Internet Explorer. Go

Setup > Live View Con

and select Java applet under

Default viewer

Video and image problems, general

Image too dark or too light

Check the video stream and camera settings under

Setup > Video & Audio > Video Stream

and

Setup > Video & Audio > Camera Settings

Missing images in uploads

This can occur when trying to use a larger image buffer than is actually available. Try lowering

the frame rate or the upload period.

Summary of Contents for P7210





















































Search results

Summary of Contents for P7210

Reviews:

Related manuals for P7210

Brands by name

Popular brands

Axis P7210, User Manual

Search results

Summary of Contents for P7210

Reviews:

Related manuals for P7210

Brands by name

Popular brands