AXIS P5655-E PTZ Network Camera
Additional settings
4. From the list of actions, select
Go to preset position
.
5. Select the preset position you want the camera to go to.
6. Click
Save
.
Direct the camera and open the lock to a gate when someone is nearby
This example explains how to direct the camera and open a gate when someone wants to enter during daytime. This is done by
connecting a PIR detector to the product’s input port and a switch relay to the product’s output port via the multicable.
Required hardware
•
Multicable (sold separately), see
•
Mounted PIR detector
•
Switch relay connected to the gate lock, in this case the switch is normally closed (NC)
•
Connecting wires
Physical connection
1. Remove the plug from the camera’s multi-connector and connect the multicable.
2. Connect the wires from the PIR detector to the input pin, see
.
3. Connect the wires from the switch to the output pin, see
.
Configure I/O ports
You need to connect the switch relay to the camera from the camera’s webpage. First, configure the I/O ports:
Set the PIR detector to an input port
1. Go to
System
>
I/O ports
.
2. Select
Input
in the
Port 1
drop-down list.
3. Give the input module a descriptive name, for example “PIR detector”.
4. To trigger an event whenever the PIR detector senses motion, select
Open circuit
in the drop-down
list.
Set the switch relay to an output port
1. Go to
System
>
I/O ports
.
10
