Axis P5534 User Manual Download Page 5

Page: 5 / 57

AXIS P5534 PTZ Dome Network Camera

Hardware overview

Part number (P/N) & Serial number (S/N)

Network connector (High PoE)

Multi-connector

Control button

SD memory card slot

Status LED indicator

Restart button

Connectors

Network connector -

RJ-45 Ethernet connector. Supports Power over Ethernet Plus (PoE+) IEEE 802.3at. Use the supplied midspan.

Caution

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network

cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar shall be

shielded (STP) and intended for their speci

c use. Make sure that the midspan is properly grounded. See

Electromagnetic

Compatibility (EMC)

for regulatory requirements.

SD card slot -

A standard or high-capacity SD card (not included) can be used for local recording with removable storage. For

instructions on how to insert and remove an SD card, please refer to the Installation Guide.

Note

Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to

Setup

> System Options > Storage > SD Card

and click

Unmount

Control button -

The control button is used for:

• Connecting to an AXIS Video Hosting System service. See

page 40

. To connect, press and hold the button for about

1 second until the Status LED

ashes green.

Summary of Contents for P5534


























































Search results

Summary of Contents for P5534

Reviews:

Related manuals for P5534

Brands by name

Popular brands

Axis P5534, User Manual

Search results

Summary of Contents for P5534

Reviews:

Related manuals for P5534

Brands by name

Popular brands