Axis P5534 Outdoor T95A00 Kit, Installation Manual, Page: 7 / 28

AXIS P5534 Outdoor T95A Kit Page 7
EN
GLIS
H
Install the hardware
Prepare for installation
1. Remove the fastening ring, dome cover and rubber gasket at the bottom of the housing by
loosening the four 10mm M3 dome screws
.
2. Remove the protective packing.
3. Optionally, insert an SD card (not included) into the SDHC (Secure Digital High Capacity) card
slot. Insert the SD card so that the diagonal corner goes in on the side closest to the control
button. See page 16.
Note:
The SD card is automatically mounted when inserted into the SDHC card slot. However,
Housing
Rubber gasket
Dome cover
Fastening ring
Dome screws
Protective packaging