Axis P5534 Outdoor T95A00 Kit, Installation Manual, Page: 10 / 28

Page 10 AXIS P5534 Outdoor T95A Kit
Remove top cover of the AXIS P5534 Outdoor T95A Kit
Remove the top cover of the housing (with four screws) from the housing using the 3mm allen key.
Mount the housing to the bracket
Notes:
• Ensure that the bracket is securely fastened, and cables are pulled through it before mounting
the camera housing. Ensure that no power is connected to the cables.
• Be very careful not to drop anything into the housing. It may be nearly impossible to remove
small items without dissassembling the housing.
1. Position the AXIS P5534 Outdoor T95A Kit against the bracket, making sure to pull the cables
(power, Ethernet, and I/O cables if applicable) into the housing, and tighten the two 25mm M5
allen key screws (included with the bracket).
2. Pull the cables through the cable glands, and secure the hole in the bracket with the cable
gland plate. Ensure the cables are securely fastened in the cable glands.
3. Connect power and network cables to the housing as described below:
• for AXIS T95A00 Dome Housing see page 11
• for AXIS T95A10 Dome Housing see page 12.
Top cover