AXIS
66583
REV: 2
COMMUNICATIONS AB
MANUAL RE-PAINT INST AXIS P551X/-E
DATE:
2016-04-07
Author: Sven Svensson
PAGE:
9(23)
- 9 -
5.1.7 Masking of the Chassis
In order to maintain the fit and function of the camera, some parts of it need to be masked before
painting. This applies to parts like threaded screw holes, assembly surfaces as well as electrical
connectors.
Step 1
Mask
all
the 19 threaded screwholes and the connector together with the corresponding slot on the
top surface of the chassis.
One easy way, to mask all above mentioned features, is to attach a mask with a diameter of 90mm in
one piece all over them, as shown in the picture below.
Connector with slot in chassis
One of 16 threaded screwholes