AXIS
66583
REV: 2
COMMUNICATIONS AB
MANUAL RE-PAINT INST AXIS P551X/-E
DATE:
2016-04-07
Author: Sven Svensson
PAGE:
13(23)
- 13 -
6 Repaint instruction for P551X series
To repaint the P551X series Dome Network Camera, the camera will have to be divided into three
parts: Chassis, Ass Lid and Dome Module. Please refer to
chapter 7.2
for an assembly overview. Each
part is then stripped from components to enable the repainting. Before the painting, crucial parts of the
camera are masked to ensure the fit and function when the camera is reassembled again.
To prevent damage to sensitive components, proper ESD protection must be carried out while
handling of the parts is only allowed in dust free environment.
Please follow the workflow as described below. Any deviations from the proposed instruction will void
the Product warranty.
6.1 Repainting of the Chassis
Please note that the original surface finish of the Chassis is Powder coating.
Step 1 (Removal of Dome Module Ass)
Remove the four screws (M4x17 ANTILOSS) that hold the Dome module ass and remove the Dome
module ass. See picture below.
Tool:
Screwdriver Torx20
Torque (when refitting): 4Nm
When refitting, Please note:
Please note the maximum torque of 4Nm.
Anti Loss Screws (4x)
