Axis P3915-R, User Manual, Page: 58 / 61

AXIS P3915-R Mk II Network Camera
Specifications
Buttons
Control button
For location of the control button, see Product overview on page 7 .
The control button is used for:
• Resetting the product to factory default settings. See page 52 .
• Connecting to an AXIS Video Hosting System service. See page 43 . To connect, press and hold the button for about 3
seconds until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See page 44 . To connect, press and hold the button for about 3 seconds.
Connectors
Network connector
The Axis product is available in two variants with different network connectors:
RJ45 Ethernet connector with Power over Ethernet (PoE).
D-coded M12 connector with Power over Ethernet (PoE).
Audio connector
The Axis product has the following audio connectors:
• Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal.
For audio in, the left channel is used from a stereo signal.
3.5 mm audio connectors (stereo)
1 Tip 2 Sleeve
Audio Input
Microphone / Line in / Microphone bias
voltage
Ground
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm
notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to:
Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window
contacts, and glass break detectors.
Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface or from the product’s webpage.
4-pin terminal block
58