AXIS P3367-VE Network Camera
Video and Audio
Set focus and zoom
Focus and zoom should only be configured when installing or reinstalling the product.
1. Install the camera as described in the Installation Guide.
2. Go to
Setup > Video & Audio
.
3. On the focus page go to the
Basic
tab.
4. Set the
zoom
level using the slider.
Note
Movements in front of the camera should be avoided when performing autofocus.
5. Click
Perform autofocus
.
6. If the result is not satisfactory, go to the
Advanced
tab.
Note
Changing the zoom level moves the focus position. Focus should always be adjusted after changing the zoom.
On the
Advanced
tab, focus can be adjusted manually:
1. Click
Open iris
to open the iris to its maximum position. This gives the smallest depth of field and provides the best
conditions for focusing.
2. Focus is set in the
Focus window
. Use the mouse to move and resize the focus window.
3. Click in the
Focus position
bar to focus on a desired location.
4. When satisfied, click
Enable iris
to enable the iris.
How to change audio settings
To change the product’s audio settings, go to
Video & Audio > Audio Settings
.
To include the audio stream in a video stream, go to
Video & Audio > Video Stream
. Under the
Audio
tab, select
Enable audio
.
Each stream profile is a separate video stream. To include the audio stream in all stream profiles, go to the audio tab in each stream
profile settings page and enable audio. For more information, see
About stream profiles on page 20
If you have enabled view areas, remember that each view area is a separate video stream. To include the audio stream in all view
areas, go to the audio tab in each video stream page and enable audio. For more information see
.
Audio Modes
The Axis product supports the following audio modes:
•
Full duplex –
Simultaneous two-way audio allowing the Axis product to transmit and receive audio at the same time.
There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.
•
Half-duplex –
Audio can be transmitted to and from the Axis product but only in one direction at a time. To transmit
audio using the Live View page, use the
Talk
and
Listen
buttons, see
.
•
Simplex – Network Camera speaker only -
Audio is transmitted from a client to the Axis product and can be played by
a speaker connected to the product. To transmit audio using the Live View page, the
Talk
and
Microphone on
buttons
must both be active, see
•
Simplex – Network Camera microphone only -
Audio captured by the product microphone is transmitted from the
Axis product to one or more clients.
26