AXIS P12 Series
Product overview
Product overview
AXIS P12 Mk II Main Unit
1
Status LED
2
Control button
3
RJ12 connector
4
Network connector (PoE)
5
SD card slot (microSD card)
About the sensor units
We recommend that you connect the sensor units to the main unit before powering the main unit. If you disconnect a sensor unit,
and connect a different sensor unit, it may be necessary to restart the main unit.
How to shorten the sensor unit cable
Note
This cable can only be shortened, not extended or modified in any other way.
The sensor unit is delivered with a cable. To shorten the cable follow these steps:
1. Cut the cable to the desired length. Measure from the sensor unit.
2. Strip the plastic outer coating from the end of the cable.
3. Peel back the shield.
4. Flatten the colored wires in the order described below.
4
Summary of Contents for P1244
Page 17: ...AXIS P12 Series Setup 17...
