Axis P1244, User Manual

Page: 16 / 22

AXIS P12 Series
Setup
8. Select an existing stream profile or create a new one.
9. Set the pre-trigger time to 5 seconds.
10. Set the post-trigger time to 60 seconds.
11. Select SD card from the list of storage options.
12. Click Ok .
How to automatically send an email if someone spray paints the lens
1. Go to System > Detectors .
2. Select Alarm for dark images . This will trigger an alarm if the lens is sprayed, covered, or rendered severely out of focus.
3. Set the Minimum duration . The value indicates the time that must pass before an email is sent.
4. Click Save .
Create an action rule:
5. Go to Events > Action rules and add an action rule.
6. Enter a name for the action rule.
7. From the list of triggers, select Detectors and then select Tampering .
8. From the list of actions, select Send Notification and then select a recipient from the list or click New Recipient
to create a new recipient.
9. Enter Subject and Message for the email.
10. Click Ok .
Applications
About applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to
axis.com/applications
To find the user manuals for Axis applications, go to axis.com
Note
• Several applications can run at the same time but some applications might not be compatible with each other. Certain
combinations of applications might require too much processing power or memory resources when run in parallel. Verify
that the applications work together before deployment.
AXIS People Counter
AXIS People Counter is an analytic application that can be installed on a network camera.
The counter is embedded in the camera which means you do not need a dedicated computer to run the application.
AXIS People Counter is intended for retail environments, like stores or shopping malls, or other environments where you want to
count people.
16