8
Hardware Installation
1. Turn off the printer’s power.
2. Connect the print server to your printer with the supplied USB
cable.
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the
side of the wireless print server.
5. Wait 1 minute until all the LEDs have stopped flashing (the
WLAN LED will continue to flash if data is being transmitted).
6. Press the print server’s external
Reset button for 5 seconds. A
test page will be printed on the connected printer, displaying
information about the print server’s IP address, firmware
number, etc.
Continue with Setup in Infrastructure Mode, on page 9 or Printer
Installation - Mac OS X, on page 21.
Reset button:
USB LED
WLAN LED
DIP switch:
Power connector
USB Connector
NOR = Normal mode
DIAG = Diagnostic Mode
- Press once to restart print server.
- Press 5 seconds to print test page.
Power LED
_book.bk Page 8 Tuesday, April 26, 2005 9:36 AM
