7
EN
GLISH
Wireless Operating Modes
The AXIS OfficeBasic USB Wireless G print server can be used in
Infrastructure and Ad-Hoc network modes using 802.11b and
802.11g wireless protocols.
Infrastructure
In Infrastructure mode, computers communicate with the print
server by first going through an Access Point. The Access Point is a
hardware device that communicates with the print server and can
be connected to computers on a wired Local Area Network (LAN) or,
wirelessly, to computers that are equipped with a wireless card.
To set up the print server in an Infrastructure network, see Setup in
Infrastructure Mode, on page 9.
Ad-hoc (Peer to Peer)
Computers with a wireless card communicate directly with the print
server (i.e. no Access Point is used). To set up the print server in an
Ad-hoc network, see Setup in Diagnostic Mode, on page 13.
_book.bk Page 7 Tuesday, April 26, 2005 9:36 AM
