Section 3: Setup for NetWare
Axis NPS 530/532 User’s Manual
25
NetWare 3.xx:
1. Select
Print Server Information
from the PCONSOLE Main Menu.
2. Select the NetWare Print Server to which you want to link your
NPS 530/532.
3. Select
Print Server Configuration
, and then
Printer Configuration
.
4. Select the first free slot in the
Configured Printers
list.
5. Make a note of the NetWare print server name and the Printer
number; you will need it later during the configuration.
6. Change
Name
to AXIS<nnnnnn>!n
(
see notes below)
<
nnnnnn>
are the last six digits of the NPS 530/532 serial number.
7. Change
Type
to Remote Other/Unknown.
8. Press <Esc>, and select
Yes
at the
Save Changes
prompt.
9. Select
Queues Serviced by Printer
in the Print Server Configuration
Menu.
10.Select
AXIS<nnnnnn>!n
in the Defined Printers list.
11.Press <Insert>, then select the queue you want to use from the Avail-
able Queues list.
Repeat this step if you want more than one queue.
12.Press <Esc> to get back to the Main Menu, then exit PCONSOLE.
Repeat this procedure for each file server and print server using the NPS
530/532.
Notes:
1. If the serial number of your NPS 530/532 is
00408C110086
, then
the default name is
AXIS110086
. The serial number is found on the
label at the back of the NPS 530/532.
2. You may change the default name using AXCFG, the Axis Configura-
tion Software. This must be done before running
PCONSOLE
.
3. You may define up to eight remote printers, each attached to its own
NPS 530/532 logical printer. Each remote printer must have a unique
name distinguished by the !n extension.
