Installing Your Camera on a Network
AXIS 2100 User’s Guide
22
Verifying the Installation From Your Browser...
Having completed the installation procedure above, you should then verify the connection
between the AXIS 2100 and the network as follows:
1. Start your Web browser (see note below) and enter the name or IP address of your camera in
the
Location
/
Address
field:
Example:
The
Home Page
for your AXIS 2100 is now displayed:
Important!
2. Continue the setup process and configure your own application using the
Installation Wizard
or
Administration Tools
, as described in
Configuring Your Camera,
on page 38.
http://172.21.1.200/
To enable the updating of images in Microsoft Internet Explorer, you set your browser to allow ActiveX
controls and perform a once-only installation of Axis' ActiveX component onto your workstation. How-
ever, if your computer environment restricts or prohibits the installation of additional software compo-
nents, you can alternatively set your AXIS 2100 to use a Java applet for updating the images. This is done
from Image settings.
