4
ME-02 USER MANUAL MD004
_____________________________________________________________________________________________
1.2
Zero threshold programming
During programming default zero threshold value is set automatically
(below the value scale thinks it’s empty and is ready for new batching
cycle) The value is usually about 10 divisions. If more weight remains
on the scale after cycle then other threshold value must be inserted
(ProG Zer).
In order to do that press PROGRAM and insert once again product
number (program number).
Found communicate informs that the product is saved in memory.
Choose PrG ZEr option by pressing ENTER.
Actual value displays and user can inscribe new one by using
numerical keys and ENTER to confirm.
PROGRAMMING can be performed many times. The created program (batching settings) is saved as long as
user doesn’t overwrites it with new data.
Attention:
CLR key – used during programming – enables to correct wrong settings in actual program (product). Double
CLR pressing will cause exit from actual programming.
Error communicates:
Err-P
- Inserting wrong program (product) number (0 or above 100)
Err-A..F
- Choosing twice the same batching device (feeder)
0.00
Found
Prod nr
READY
Program
0
.
1 2 3
4 5 6
7 8 9
Enter
PrG ZEr
123
4 5 6
7 8 9
0
1 2 3
.
Enter
Enter
