Axis M7016, Installation Manual

Page: 11 / 88

AXIS M7016 Video Encoder
5
Restart button
LED Indicators
Status LED Indication
Green Steady green for normal operation.
Amber Steady during startup. Flashes when restoring settings.
Red Flashes red for firmware upgrade failure.
Network LED Indication
Green
Steady for connection to a 1 Gbit/s network. Flashes for network
activity.
Amber
Steady for connection to a 10/100 Mbit/s network. Flashes for
network activity.
Unlit No network connection.
Power LED Indication
Green Normal operation.
Amber
Flashes green/amber during firmware upgrade.
Connectors and Buttons
For specifications and operating conditions, see page 13 .
BNC Connector
Each video input is terminated using a coax/BNC connector.
Connect a 75 Ohm coaxial video cable; the recommended maximum length is 250 m (800 ft).
Note
75 Ohm video termination can be enabled/disabled for the video input through the
product's web page at
Video > Camera Settings > Video termination . Video termination is
enabled on factory default. If the product is connected in parallel with other equipment,
for optimum video quality, it is recommended that video termination is enabled only for
the last device in the video signal chain.
11