Axis M3005-V, User Manual, Page: 7 / 58

AXIS M3005-V Network Camera
Hardware Overview
Hardware Overview
2
3
4
5
6
1
1
Status LED
2
Dome cover
3 Control button
4
microSD card slot
5
Network connector (PoE)
6 Focus ring
Connectors and Buttons
For technical specifications, see page 54 .
Control Button
For location of the control button, see Hardware Overview on page 7 .
The control button is used for:
• Enabling the Focus Assistant. Press and very quickly release the Control button.
• Resetting the product to factory default settings. See page 49 .
• Connecting to an AXIS Video Hosting System service. See page 42 . To connect, press and hold the button for about 3
seconds until the Status LED flashes green.
• Connecting to AXIS Internet Dynamic DNS Service. See page 42 . To connect, press and hold the button for about 3 seconds.
LED Indicators
Note
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .
Status LED
Indication
Unlit Connection and normal operation.
Green Shows steady green for 10 seconds for normal operation after startup completed.
Amber Steady during startup. Flashes during firmware upgrade.
7