Axis Fine, User Manual, Page: 87 / 88

Time Switch mode:
Click "Pulse", the camera will trigger the external output devise for
several seconds, The duration length is according to the "interval" setting in
Output Setting.
VIII.Factory Default
If you forget your password, please follow the steps to revert back to
default value.
• Remove the power and ethernet cable. Press and hold the button
as the picture below.
• Connect power to the camera again, and do not release the
button during the system booting.
• It will take around 30 seconds to boot the camera.
• Release the button when camera finishes proceed.
87