Axis Fine, User Manual, Page: 74 / 88

b. Snapshot: After enable the snapshot function; user can select
the storage position of snapshot file, the interval time of
snapshot and the reserved file name of snapshot.
c. Interval: The interval between two snapshots.
3. I/O Setting
a. Input Setting:
IP Camera supports input and output. When the input condition
is triggered, it can trigger the relay out; send the video to mail
addresses /FTP server / SAMBA.
• Intervel:
For example, if you select "10 sec" here, once the input
alarm is detected and action is triggered, it cannot be
triggered again within 10 seconds.
• Based on the schedule:
When the option box is ticked, only during the selected
schedule time the I/O is enabled. That is, for example, the
11th hour of Monday has not been colored in the schedule
table, then no action will be triggered even the camera
detects input signal during 11:00~12:00 on Monday.
b. Output Setting:
The output mode affects the DO or relay out duration.
(i)
74