Axis Fine, User Manual, Page: 38 / 88

RTSP Server: enable or disable
RTSP Authentication:
"Disable" means everyone who knows your camera IP Address can
link to your camera via RTSP. No username and password are required.
Under "Basic" and "Digest" authentication mode, the camera asks the
user to give username and password before allows accessing. The
password is transmitted as clear text under basic mode, which provides a
lower level of security than under digest mode.
Make sure your media player supports the authentication schemes.
(iii) RTSP Port: setup port for RTSP transmitting (Default: 554)
(iv) RTSP Start and End Port: in RTSP mode, you may use
TCP and UDP for connecting. TCP connection uses RTSP
Port (554). UDP connection uses RTSP Start and End Port.
f. Multicast Setting (Based on the RTSP Server)
Multicast is a bandwidth conservation technology. This
function allows several users to share the same packet sent
from IP camera. To use
Multicast, appoint IP Address and port here. TTL means
the life time of packet, the larger the value is, and the
more users can receive the packet.
To use Multicast, be sure to enable the function "Force
Multicast RTP via
RTSP" in your media player. Then key in the RTSP path of
your camera: "rtsp://(IP address)/" to receive the multicast.
g. ONVIF
38