Axis C1610-VE User Manual Download | Manualshive

Page: 12 / 46

background image

AXIS C1610-VE Network Sound Projector

Learn more

Learn more

Session Initiation Protocol (SIP)

The Session Initiation Protocol (SIP) is used to set up, maintain and terminate VoIP calls. You can make calls between two or more
parties, called SIP user agents. To make a SIP call you can use, for example, SIP phones, softphones or SIP-enabled Axis devices.

The actual audio or video is exchanged between the SIP user agents with a transport protocol, for example RTP (Real-Time
Transport Protocol).

You can make calls on local networks using a peer-to-peer setup, or across networks using a PBX.

Peer-to-peer SIP (P2PSIP)

The most basic type of SIP communication takes place directly between two or more SIP user agents. This is called peer-to-peer SIP
(P2PSIP). If it takes place on a local network, all that’s needed are the SIP addresses of the user agents. A typical SIP address in this
case would be

sip:<local-ip>

.

Example

SIP

sip:192.168.1.101

sip:192.168.1.100

You can set up a SIP-enabled phone to call an audio device on the same network using a peer-to-peer SIP setup.

Private Branch Exchange (PBX)

When you make SIP calls outside your local IP network, a Private Branch Exchange (PBX) can act as a central hub. The main
component of a PBX is a SIP server, which is also referred to as a SIP proxy or a registrar. A PBX works like a traditional switchboard,
showing the client's current status and allowing for example call transfers, voicemail, and redirections.

The PBX SIP server can be set up as a local entity or offsite. It can be hosted on an intranet or by a third party provider. When you
make SIP calls between networks, calls are routed through a set of PBXs, that query the location of the SIP address to be reached.

Each SIP user agent registers with the PBX, and can then reach the others by dialing the correct extension. A typical SIP address in
this case would be

sip:<user>@<domain>

or

sip:<user>@<registrar-ip>

. The SIP address is independent of its IP

address and the PBX makes the device accessible as long as it is registered to the PBX.

Example

12

«
...
10
11
12
13
14
...
»

Summary of Contents for C1610-VE















































Reviews:

No comments

Related manuals for C1610-VE

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 124

Brand: Panasonic Pages: 66

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 144

Brand: Panasonic Pages: 30

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 72

PTL785U - LCD PROJECTOR UNIT

Brand: Panasonic Pages: 20

PTL597UL - LCD VIDEO PROJRCTOR

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 13

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 81

Brand: Panasonic Pages: 184

Brand: Panasonic Pages: 270

PTLB75NTU - LCD PROJECTOR

Brand: Panasonic Pages: 62

PTLB80NTU - LCD PROJECTOR

Brand: Panasonic Pages: 118

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands