AXIS C1410 Network Mini Speaker
Additional settings
6. Click
Save
.
7. Set up the SIP settings the same way as for peer-to-peer. See
Set up direct SIP (P2P) on page 7
for more information.
Stop audio with DTMF
This example explains how to:
•
Configure DTMF on a device.
•
Set up an event to stop the audio when a DTMF command is sent to the device.
For more information about setting up rules, visit
Get started with rules for events
For more information about the SIP setting options, see
.
1. Go to
System
>
SIP
>
SIP settings
.
2. Make sure
Enable SIP
is turned on.
If you need to turn it on, remember to click
Save
afterwards.
3. Go to
SIP accounts
.
4. Next to the SIP account, click
>
Edit
.
5. Under
DTMF
, click
+ DTMF sequence
.
6.
Under
Sequence
, enter "1".
7. Under
Description
, enter "stop audio".
8. Click
Save
.
9. Go to
System
>
Events
>
Rules
and click
+ Add a rule
.
10. Under
Name
, enter "DTMF stop audio".
11. Under
Condition
, select
DTMF
.
12. Under
DTMF Event ID
, select
stop audio
.
13. Under
Action
, select
Stop playing audio clip
.
14. Click
Save
.
Play audio when a camera detects motion
This example explains how to set up the audio device to play an audio clip when an Axis network camera detects motion.
Prerequisites
•
The Axis audio device and Axis network camera are located on the same network.
•
The audio clip stored on the Axis audio device.
•
The motion detection application is configured and running in the camera.
Prepare an audio clip link:
1. Go to the device interface of the speaker, by entering its IP address in a web browser.
2. Go to
Audio
>
Audio clips
.
9