AXIS C1410 Network Mini Speaker
Additional settings
Note
Some email providers have security filters that prevent users from receiving or viewing large attachments, from
receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and
locked email accounts.
2.8 Click
Save
.
3. Set up the automated speaker test:
3.1
Go to the device interface >
System
>
Events
>
Rules
.
3.2
Click
Add a rule
.
3.3
Enter a name for the rule.
3.4 Under
Condition
, select
Schedule
and select from the trigger list
3.5
Under
Schedule
, select your schedule (“Daily at 6pm”).
3.6
Under
Action
, select
Run automatic speaker test
.
3.7 Click
Save
.
4. Set up the condition for sending an email when the speaker test fails:
4.1
Go to the device interface >
System
>
Events
>
Rules
.
4.2
Click
Add a rule
.
4.3
Enter a name for the rule.
4.4 Under
Condition
, select
Speaker test result
.
4.5 Under
Speaker test status
, select
Didn’t pass the test
.
4.6
Under
Action
, select
Send notification to email
.
4.7
Under
Recipient
, select your recipient (“Speaker test recipients”)
4.8
Enter a subject and a message, and click
Save
.
Set up direct SIP (P2P)
Use peer-to-peer when the communication is between a few user agents within the same IP network and there is no need for extra
features that a PBX-server could provide. To better understand how P2P works, see
Peer-to-peer SIP (P2PSIP) on page 11
.
For more information about setting options, see
.
1. Go to
System
>
SIP
>
SIP settings
and select
Enable SIP
.
2. To allow the device to receive incoming calls, select
Allow incoming calls
.
3. Under
Call handling
, set the timeout and duration for the call.
4. Under
Ports
, enter the port numbers.
-
SIP port
– The network port used for SIP communication. The signaling traffic through this port is non-encrypted.
The default port number is 5060. Enter a different port number if required.
-
TLS port
– The network port used for encrypted SIP communication. The signaling traffic through this port is
encrypted with Transport Layer Security (TLS). The default port number is 5061. Enter a different port number
if required.
7