OPERATION MANUAL
15
__________________________________________________________________________________________________________________
Set a value of threshold causes a turn-on an indicators
MIN, OK
i
MAX, state of
these indicators depends on value on indicator and thresholds.
If the result of details calculation is:
- lower than threshold
undEr
– scale signalizes
MIN
,
- between thresholds - scale signalizes
OK
, and during a pass a threshold scale
turn-on buzzer,
- bigger than threshold
OVEr
– and during a pass a threshold scale turn-on
buzzer.
Note:
On the first start scale value of thresholds are set to maximum.
During a setting a upper threshold remember that his value can’t be lower that
value of minimum threshold.
12. Summation of measurements series (
Σ
Σ
Σ
Σ
.)
Scale is equip In summation register. That registers enable addition a next result
of measurements.
1. Put element on the pan and press
→
→
→
→Σ
Σ
Σ
Σ
+
button
.
Contents of this register have
been showed temporary in centered display with indicator
Σ
.
Note:
Using a
→
→
→
→Σ
Σ
Σ
Σ
-
key causes a subtract indication from register.
2. Press several times a
DATA
key to belongs for continuous displaying of
register – in this case an indicator is turn-on.
