USER MANUAL
7
_____________________________________________________________________________________________________________________
7. Preparation
1. Take the scale out of the package
removing protective foils.
2. Take a pan off and remove protective
elements from below the pan.
3. Place the scale on a stable ground not
affected by mechanical vibrations and
airflows.
4. Level the scale with the rotating rear legs
so that the air bubble in the water-level at
the back of the scale is in the middle.
8. Start-up
Leave the pan empty, plug the feeder to the mains (~230V/50Hz) and plug the
feeder connector to the 12V power socket at the back of the scale.
The scale proceeds with following start-up actions:
Display test.
Basic electronic components tests:
C1,
C-2, ... C-6
.
Program version.
The scale is now ready to work.
Correct
Wrong
