9
AXIS P3301/AXIS P3304
Note:
• HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web browsers and
servers. The HTTPS certificate controls the encrypted exchange of information.
• The default administrator user
root
cannot be deleted.
• If the password for root is lost or forgotten, the network camera must be reset to the factory default settings. See
page 40.
Adjusting the image
Open the
Live View
page in the web interface and make the
following adjustments on the camera.
1. Loosen the locking screw and tilt adjustment screws.
2. Turn the lens to the desired position.
3. Gently tighten the locking screw and tilt adjustment screws
to secure the camera’s position.
4. Turn the image balance ring to set the horizontal position.
5. Open the Focus Adjustment page in the web interface under
Basic Setup > Focus
and follow the on-screen instructions.
Use the image window to adjust the focus and zoom.
To set the focus and zoom, loosen the zoom and focus
pullers counterclockwise and rotate the rings.
Lock the focus and zoom pullers in position by rotating the
screws clockwise.
Note:
Due to the dome's tendency to refract light, the image might appear
slightly out of focus once the dome has been mounted. To compensate, focus on an object slightly closer than the
intended area.
To configure the password
directly via an unencrypted
connection, enter the password here.
To create an HTTPS connection,
start by clicking this button.
Image
Focus puller Zoom puller
balance
ring
Locking screw
screw
Tilt adjustment
(on each side)
