1
BOWL LIFT SLIDEWAY
2
BOWL LIFT HANDLE
3
GEAR SHIFT LEVER
4
DRIP RING
5
AGITATOR
6
BOWL
7
THUMBSCREW
8
HUB PLUG
9
SAFETY GUARD
10
BOWL CLAMP
11
BOWL SUPPORT
To install an agitator (No.5), the bowl (No.6) must be installed and fully
lowered by bowl lift handle (No.2). Place the agitator in the bowl, push it
up on the agitator shaft, and turn it clockwise to seat the shaft pin in the
slot of the agitator shank.
BOWL
New mixer's bowl and agitators (beater, whip, and dough arm) should be
thoroughly washed with hot water and mild soap solution, rinsed with
either a mild soda or vinegar solution, and thoroughly rinsed with clean
water BEFORE being put into service. This cleaning procedure should
also be followed for bowls and agitators before whipping egg whites with
or whole eggs.
6
Summary of Contents for AX-M40
Page 1: ...AX M40 ...
