The meat and food chopper attachment should be operated in second or
third speed. If material in the cylinder stalls the mixer, stop the mixer at
once. DO NOT attempt to restart the mixer in a lower speed - remove the
adjusting ring, knife, plate, and worm and clear the obstruction.
MAINTENANCE
NOTE: ALL MAINTENANCE WORK SHOULD BE DONE ONLY
AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL
POWER AND GROUNDING.
CLEANING
• Never use a metal or stiff brush to clean the mixer. Never
clean the mixer with a water hose or any fluid pressure.
• The mixer should be thoroughly cleaned daily.
• Bowls and agitators should be removed from the mixer and cleaned in
a link.
• The DRIP RING or
SAFETY GUARD
should be inspected
periodically for moisture or lubricant dripping. Remove the cup and
wipe it with a soft cloth. A large flat blade screwdriver may be used to
remove the drip cup after remove the screw.
LUBRICATION
• The transmission case is filled special grease that will last for several
years. When grease is needed for replacement, it should be ordered
from our authorized service representative.
• Planetary gears are already filled with enough lubricating grease. No
more grease is to be filled.
MIXING HEAVY DOUGH
8
Summary of Contents for AX-M40
Page 1: ...AX M40 ...
