52
USER MANUAL
__________________________________________________________________________________________________________________
16.14 Packing goods control (TP)
Application enables to do destructive, non destructive and full control (according to polish regulations),
calculating values demanded by reference method and qualification of packed goods.
Application options:
- Activation
–
activate control,
-
Preview
–
check summing register status,
-
Qn
–
declared net weight,
-
n
–
planned quantity of measurements:
<20> - destructive,
<30+30>,<50+50>,<80+80> - non destructive,
<...> - full control / any measurements quantity
- Unit:
<g> -
indication and evaluation in grams
<ml> - evaluation in ml
- Mode
–
adding successive result mode,
<
Auto
>
–
after scale indication stabilization,
<
Manual
>
–
after putting load and pressing
key,
-
Tare
–
inscribe package tare (substracted from
goods with package weight)
-
Shortcut
–
fast access key by navigation keys
select: F1, F2, ... or F5 ( F5 - suggested).
Actions sequence:
Make series of weighing. In
manual
mode press
key after each measurement. In
Auto
mode
measurements are stored automaticallly (if
Threshold application is also active then to store
measurement
OK
qualification is required).
Storing to memory is confirmed by displayed
quantity of stored measurements and print icon.
Re-calling the application and choosing
Preview
option (or using shortcut key eg.
F5
) displays
results of actual control and available options:
- printout results,
F1
–
end control,
F2
–
reset the results,
CLR
- back to summing
APPLICATIONS
...
TP (packaged goods)
...
Exit
TP (PACKAGED GOODS)
1. Activation
2. Preview
3. Qn:
4. n = <20><30_30><50_50><80_80><...>
5. Unit: <g><ml>
6. Tare
<on><off>
7. Printout
<on><off>
4. Mode:
<Auto><Manual>
5. Shortcut:
<-><F1><F2>...<F5>
7. Exit
Max ... Min ... e= ... d= .. II
52.82
g
0%
100%
Max ... Min ... e= ... d= .. II
N=003
0%
100%
TP/PREVIEW
Defective : 0
Disqualifying : 0
Average : 55.78 g
Average qual. : 50.00 g
Stand. Dev. :
Result : continues
print F1 end F2 reset CLR exit
