Axis Wake Research A20, Owner'S Manual, Page: 119 / 137

checked. An authorized Axis dealer has the measurement detail for correct alignment.
• Prior to starting the engine in the water, key it ON and OFF two or three times, allowing several
seconds between key-on cycles, prior to cranking the engine to fully start. The purpose of this is to
prime the fuel system. If the engine appears reluctant to start, allow a couple minutes of cool-down
for each attempt to crank and start the engine. Watch the gauges for readings and listen for abnormal
sounds. Keep speeds low until the engine temperature rises to the normal operating temperature.
Failure to properly perform annual maintenance, plus storage/
winterization procedures as described in this Owner’s
Manual is likely to result in damage to the boat, components,
drive train and features. Such damage is not covered under
warranty!
2016 Axis Wake Research Owner’s Manual . . . Page 4-18