PLMATICF01
31/05/2016
8
negative flow).
A flashing flow direction arrow means that there is water leakage (uninterrupted water consumption via
water taps, toilet pans, etc.). These indicators appear in 1 hour after occurrence of the water outlet and will
go off automatically after elimination of leakage.
Special control mode is provided for automatic testing of the meter, which can be turned on or off using
AXIS-EVS parameter setting tools via the optical interface.
The control mode allows to form 0.002 l/imp control pulses in the optical interface outlet, and the LCD
indicator will display in turn the changing control mode parameters every 2 seconds.
1) PULS note
PULS note indicates that the meter is in the control mode and the output
pulses are being formed.
2) enhanced threshold water volume accumulated during the control mode
The volume of water accumulated during the control mode is displayed
on the indicator in millilitres. The example shows the flow volume of
1,823 litres.
3) flowrate
Flowrate is indicated in m
3
/h.
Negative flowrate readings are displayed with
“–” symbol.
The example shows that the displayed flowrate value is 0.980 m
3
/h.
When the control mode is on, the main functions of the meter remain activated: the volume of water
running through during the control mode will also be added to the value of the accumulated volume of
water used, which will be displayed, once the meter operates in a standard mode again.
The control mode will switch off automatically in 12 hours.
Error code, failure description and elimination methods
Table 1
Error
code
Failure description
Notes/ instructions
2
The battery service life has expired
The device must be replaced!
3
Failure of the readings storage device
The device must be replaced!
4
Failure of electronic elements
The device must be replaced!
F
Power supplied was disconnected
The device must be replaced!
b
Optical interface reading is blocked
(allowable access frequency was exceeded)
Continue reading via the optical interface no sooner
than in 4 hours (when the error code indicator
disappears)
d
The flowrate exceeds the allowable limits
(more than
2 x Q
4
)
Check the equipment settings!
If necessary, replace the meter with one with a
higher Q
4
7. WARRANTY
7.1. The manufacturer shall grant a 24-month warranty commencing from the start of operation of the
meter, given the user complies with the operation and technical maintenance requirements.
7.2. Manufacturer's address:
Axis Industries AB, Kulautuvos 45a, Kaunas LT-47190, Lithuania. Tel.: (+370-37) 360234, fax.:
360358.
