PLMATICF01
31/05/2016
7
indication window is displayed.
3) reporting day of the last month
Indicator
“1” and the last day of the reporting date (month, day) are
displayed. When the results of the last reporting day data are
inaccessible, the display shows
“1 --.---.---“.
4) volume of water used before the reporting day of the last month
The volume of water used before the last reporting day is displayed.
When data are inaccessible,
“00000.000” will appear on the display.
5) reporting day of the month before the last
Indicator
“2” and the last but one day of the reporting date (month, day) are displayed. When the results of
the last but one reporting day data are inaccessible, the display
shows
“2 --.---.---“.
6) volume of water used before the reporting day of the month before the last
The volume of water used before the last but one reporting day is
displayed. When data are inaccessible,
“0.000” will appear on the
display.
7) annual reporting date
Indicator
“2” and the last but one day of the reporting date (month,
day, date) are displayed. When the results of the last but one
reporting day data are inaccessible, the display shows
“2 --.---.---“.
8) volume of water used before the annual reporting day
The volume of water used before the last but one reporting day is
displayed. When data are inaccessible,
“0.000” will appear on the
display.
9) control number
The control number comprises the value of the volume of water
used before the last reporting date and the device number. This
number is used to verify the correct reading of the value of the water
volume accumulated before the last reporting date
10) flowrate
Flowrate is indicated in m
3
/h.
Negative flowrate readings are displayed with
“–” symbol.
The example shows that the displayed flowrate value is 0.980 m
3
/h.
11) error code
The readings of the error code are displayed only in the presence of
an error. Each digit corresponds to the possible cause of error.
Several codes of the errors that occurred simultaneously may be
displayed (See, Table 1).
12) error
Indicates the error in the meter operation. Displayed only in the
event of major failure of the water meter (codes 2, 3, 4 or F).
In the event of failure the meter must be replaced!
13) error date
If a major failure occurs in the water meter, the error date will be
displayed.
The arrow on the display will indicate the current direction of the
flow. (if the arrow points to the right
– positive flow, to the left –
