Axis Industries QALCOMATIC FLOW C Technical Description, Installation And User Manual Download Page 2

PLMATICF01 
31/05/2016 

 

1. APPLICATION AND DESCRIPTION 

 

 

 

The electronic water meter with autonomous power supply, designed for metering of cold 

water (0.1 - 

30) °C (QALCOMATIC FLOW C - marked in blue) and hot water (30 - 90) 

o

C (QALCOMATIC 

FLOW H - marked in red) flowing in pipelines used in apartments, single family houses or other premises of 
similar type. Water pressure must not be higher than 1.6 MPa. 

It is a single-jet dry type meter. The water flow running through the meter rotates the impeller with a 

mounted  asymmetric  metal  plate,  which  changes  the  measuring  coils  decrement  by  rotational  frequency, 
which  is  then  measured  by  the  electronic  block,  that  also  records  the  number  of  rotations  and  calculates 
the volume of water running through, and displays the readings on the indicator. 

Remote data reading can be enabled by the use of optical interface, and by activating the wired M-

bus or wireless (radio) connection interface in the remote data collection system.  

The meter is protected against the external effects of the magnetic field. 

 

The  counter  shall  be  fastened  to  the  meter  frame  using  a  transparent  cap,  which  eliminates  the 

possibility of accessing the indication device without damaging the cap. This structure of the cap performs 
the function of a seal. 
 

 The meters may be mounted both horizontally and vertically. 

 

The meter mounting  length may be  80 mm or 100  mm with connection tread  G ¾B“ or 130 mm 

with connection thread G 1B

“. 

 

Meter's permanent flowrate (Q

3

) can be 1.6 m

3

/h, 2.5 m

3

/h or 4 m

3

/h.   

 

Minimum  flowrate  (Q

1

)

 

and  permanent  flowrate

 

(Q

3

)

 

ratio  Q

3

/Q

1

  (R)  can  be  optionally  50,  63,  80, 

100, 125, 160 or 200. 

Depending  on  the  temperature  class,  the  meter  can  be  used  for  metering  cold  (T30)  or  hot 

(T30/90) water. 

Composition of the meter order code: 

 
                Water meter           QALCOMATIC FLOW C

  

–   □  □  □  □  □ – □  

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 

Type and temperature class: 

Temperature class T30:         FLOW C 
Temperature class T30/90:     FLOW H 

 

Connection length and type: 

80 mm  G ¾ B“     1 

                                        

110 mm  G ¾ B“         2 

                                        130 mm  G1 B

“          3 

Permanent flowrate Q

3

:           1.6 m

3

/h             1 

                                                 2.5 m

3

/h             2 

                                                   4 m

3

/h             3 

Flows Q

3

/Q

1

 ratio (R) in horizontal position:            

                                                             R50-H           2 
                                                             R63-H           3 
                                                             R80-H           4 
                                                             R100-H         5 
                                                             R125-H         6 
                                                             R160-H         7 
                                                             R200-H         8

 

Flows Q

3

/Q

1

 ratio (R) in vertical position:                     

                                                                  R50-V          2 
                                                                  R63-V          3 
                                                                  R80-V          4 
                                                                  R100-V        5 

                                                                   

Installation kit:                               Included           1 
    

                   Not included   (or omitted)     0          

    

Communication interface type:   none        0 
                                                    radio       1 
                                                    M-bus     2 

Summary of Contents for QALCOMATIC FLOW C









Reviews: