10
Installation Guide
Important: Remove these two screws before installation. Otherwise, the player will not work.
Installation Procedures
First complete the electrical connections, and
then check for correctness.
Reset
Press
button to
À
ip down the panel. Then
press the
RESET
button with a pointed object
to reset the unit to the original status.
Note: Pressing the
RESET
button will erase
the clock and stored stations.
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below.
The dashboard should be 4.75mm - 5.56mm
thick to be able to support the unit.
1.
2.
Inset mounting collar into the dashboard, and bend the mounting tabs out with a
screwdriver.
Make sure th
H
lock lever
is flush with the mounting collar (not projecting outward).
Secure the rear of the unit.
After fixing mounting bolt and power connector, fix the rear of the unit to the car body by
WKH
rubber
cushion.
3.
Insert trim plate.
lock lever
53mm
183mm
Summary of Contents for AX1501
Page 14: ...P N 127075006994 AX150 ...
