Axis Car Audio AX1501, Instruction Manual

Page: 4 / 14

General Operation
Power On/Off Button
Press the /MUTE button to turn RQ the unit
when the vehicle ignition switch is DFWLYH .
3UHVV DQGKROGWKH 087(EXWWRQWRWXUQ
RIIWKHXQLW
Adjust Volume level
Rotate the VOL control to adjust volume
level. Rotate clockwise to increase and
anticlockwise to decrease the volume.
Audio Mute
Press the /MUTE button to mute the volume
from the system. “MUTE” will appear on the
display
and the volume will be muted.
Press the /MUTE button again to return
the volume level to the setting in use before
the Mute function was activated.
Audio Controls
To adjust the balance and fader, press
the VOL control until the appropriate audio
control appears on the display panel.
Within five seconds, rotate the VOL control
to adjust the audio settings for the selected
function.
Mode Button (SRC)
Press the SRC button to change between
Radio, DISC (when disc is in), USB (when
USB is connected), Card
(when SD/MMC card
3
is LQ or AUX play, etc.
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface on the front panel.
2. Press the SRC button to select Aux-In
mode.
Press SRC again to cancel Aux-In mode and
go to the next mode.
The front AUX IN and rear AUX IN can
QRW be
use G VLPXOWDQHRXVO\
Setting the Clock
The correct time of day can be set by pressing
and holding the DISP button.
To set the clock:
1.
Turn the vehicle ignition and radio on.
2. Press the DISP button to view the clock.
3. With the clock visible on the display,
press and hold the DISP button until the
time display
À ashes.
4. Within 5 seconds, rotate the VOL control
counter clockwise to adjust the minutes
to the desired setting. To change the
hour, rotate the VOL control clockwise to
adjust the hour to the desired time.
SOUND SETTING
*QNF FQYP the [ VOL ] button to enter sound
effect mode. Rotate the knob to change
BEAT EQ in this order:
DSP OFF -> POP -> CLASSIC -> ROCK ->
JAZZ
Press the
[ VOL ]
button, to select USER
preset V including:
BALANCE -> FADER , rotate the knob to
select a value.
BALANCE:LEFT 1-7->CENTR
( ->RIGHT 1-7
FADER:FRONT 1-7->CENTR ( ->REAR 1-7