6
G. SETUP
Press
SETUP
to display the Main screen of the
SETUP
Menu on the
screen. Press
SETUP
again to exit the
SETUP Menu
and the unit
will resume its last playback mode.
1) Press
SETUP
, the
General Setup Page
will display on screen.
a).Select TV Display using the
UP/DOWN
button, and then press
RIGHT
to enter the submenu. Select the TV display mode on the screen
using
UP/DOWN
, and press
ENTER
to confirm the setting. Press
LEFT
to return.
* Normal/PS: When the player outputs signal to a normal TV, and a
wide picture is shown on the full screen. Some of the picture sides will
not be visible.
* Normal/LB: When the player outputs signal to a normal TV, and a
wide picture is shown on the screen with black strips at both the top
and bottom of the screen.
* Wide: When the player outputs signal to a wide screen TV, a
wide picture is shown on the full screen.
b).Angle Mark
* On: The screen will show the angle mark icon. (*If an angle option is
available).
* Off: The screen will not display the Angle Mark
NOTE:
Not all discs contain above features. The above features are
disc dependent.
c) OSD Lang
You can choose the language you desired as the OSD language.
d). Screen Saver
*On: Enables screen saver
*NOTE:
The DVD player will enter the Screen Saver mode after
approximately five minutes if the same image remains on the screen.
*Off: Disables screen saver.
PDF created with FinePrint pdfFactory Pro trial version
http://www.fineprint.com