AXIOMTEK SBC8440, User Manual, Page: 61 / 86

SBC8440 3.5 Form Factor SBC User’s Manual
Award BIOS Utility
))
NOTE:
If your CPU does not have an Internal Cache,
then “CPU Internal Cache” will not be shown on
the screen.
!" Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST)
after the system is turned ON. If it is set to Enabled, BIOS will skip
some items during POST.
Enabled
Enable quick POST
Disabled
Normal POST
!" Boot Sequence
This field determines the drive that the system searches first for an
operating system. The default value is C, CDROM, A. The options are :
C,CDROM,A
System will first search for hard disk drive then
CDROM, floppy disk drive.
A, C, CDROM
System will first search for floppy disk drive then
hard disk drive, CDROM
!" Swap Floppy Drive
This allows you to determine whether to enable Swap Floppy Drive or
not. When enabled, the BIOS swaps floppy drive assignments so that
Drive A becomes Drive B, and Drive B becomes Drive A. By default,
this field is set to Disabled.
!" Boot Up Floppy Seek
When enabled, the BIOS will seek whether or not the floppy drive
installed has 40 or 80 tracks. 360K type has 40 tracks while 720K,
1.2M and 1.44M all have 80 tracks. By default, this field is set to
Enabled.
Enabled
BIOS searches for floppy disk drive to determine if it is 40
or 80 tracks. Note that BIOS can not tell from 720K, 1.2M
or 1.44M drive type as they are all 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by
track number. Note that there will not be any warning
message if the drive installed is 360K.