SBC82810 Pentium
®
M All-in-One Half-Size Board User’s Manual
Award BIOS Utility
55
z
Resources Controlled By
The Award Plug and Play BIOS can automatically configure all
the boot and Plug and Play-compatible devices. If you select Auto,
all the interrupt request (IRQ), DMA assignment, and Used DMA
fields disappear, as the BIOS automatically assigns them. The
default value is
“
Manual
”
.
z
IRQ Resources
When resources are controlled manually, assign each system
interrupt as one of the following types, depending on the type of
device using the interrupt:
1.
Legacy ISA Devices compliant with the original PC AT
bus specification, requiring a specific interrupt (such
as IRQ4 for serial port 1).
2.
PCI/ISA PnP Devices compliant with the Plug and Play
standard, whether designed for PCI or ISA bus
architecture.
The default value is
“
PCI/ISA PnP
”
.
z
DMA Resources
When resources are controlled manually, assign each system
DMA channel as one of the following types, depending on the
type of device using the interrupt:
1.
Legacy ISA Devices compliant with the original PC
AT bus specification, requiring a specific DMA
channel.
2.
PCI/ISA PnP Devices compliant with the Plug and
Play standard, whether designed for PCI or ISA bus
architecture.
The default value is
“
PCI/ISA PnP
”
.
z
Memory Resources
This sub menu can let you control the memory resource.
z
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors
properly. This field allows you to set whether MPEG ISA/VESA
VGA Cards can work with PCI/VGA or not. When enabled, a
PCI/VGA can work with a MPEG ISA/VESA VGA card. When
disabled, a PCI/VGA cannot work with a MPEG ISA/VESA Card.
