AXIOMTEK SBC8241, User Manual

Page: 48 / 50

SBC8241 486 All-in-One Half-size User’s Manual
AMI BIOS Fatal Error Codes
)1
Checkpoint Description
8E
Mouse check and initialization complete.
Going for hard disk controller reset.
8F
Hard disk controller reset done. Floppy setup to be done next.
91
Floppy setup complete. Hard disk setup to be done next.
94
Hard disk setup complete.
Going to set base and extended memory size.
95
Memory size adjusted due to mouse support, hdisk type-47. Init of
different BUSes optional ROMs from C800 to start. (Please see
Reference for details of different BUSes)
96
Going to do any init before C800 optional ROM control.
97
Any init before C800 optional ROM control is over.
Optional ROM check and control will be done next.
98
Optional ROM control is done. About to give control to do any
required processing after optional ROM returns control.
99
Any initialization required after optional ROM test over. Going to
setup timer data area and printer base address.
9A
Return after setting timer and printer base address.
Going to set the RS-232 base address.
9B
Returned after RS-232 base address.
Going to do any initialization before coprocessor test.
9C
Required initialization before coprocessor is over.
Going to initialize the coprocessor next.
9D
Coprocessor initialized.
Going to do any initialization after coprocessor test.
9E
Initialization after co-processor test is complete.
Going to check extd keyboard, keyboard ID and num-lock.
9F
Extd keyboard check is done, ID flag set, num-lock on/off,
keyboard ID command to be issued.
A0
Keyboard ID command issued.
Keyboard ID flag to be reset.
A1
Keyboard ID flag reset.
Cache memory test to follow.
A2
Cache memory test over.
Going to set the keyboard typematic rate.
A3
Soft error display complete.
Going to set the keyboard typematic rate.
A4
Keyboard typematic rate set.
Going to program memory wait states.
Continued . . . . .