AXIOMTEK SBC8241, User Manual

Page: 47 / 50

SBC8241 486 All-in-One Half-size User’s Manual
AMI BIOS Fatal Error Codes
8.
Checkpoint Description
60
DMA page register test passed.
About to go for DMA #1 base register test.
62
DMA #1 base register test passed.
About to go for DMA #2 base register test.
65
DMA #2 base register test passed.
About to program DMA unit 1 and 2.
66
DMA unit 1 and 2 programming over.
About to initialize 8259 interrupt controller.
67
8259 initialization over.
About to start keyboard test.
7F
Extended NMI sources enabling is in progress.
80
Keyboard test started. Clearing output buffer, checking for stuck
key. About to issue keyboard reset command.
81
Keyboard reset error/stuck key found. About to issue keyboard
controller interface test command.
82
Keyboard controller interface test over.
About to write command byte and init circular buffer.
83
Command byte written, Global data init done.
About to check for lock-key.
84
Lock-key checking over.
About to check for memory size mismatch with CMOS.
85
Memory size check done. About to display soft error and check for
password or by pass setup.
86
Password checked.
About to do programming before setup.
87
Programming before setup complete.
Going to uncompress SETUP code and execute CMOS setup.
88
Returned from CMOS setup program and screen is cleared. About
to do programming after setup.
89
Programming after setup complete.
Going to display power on screen message.
8B
First screen message display. <WAIT...>message displayed. About
to do Main and Video BIOS shadow.
8C
Main and Video BIOS shadow successful.
Setup options programming after CMOS setup about to start.
8D
Set up options are programmed, mouse check and init to be done
next.
Continued . . . . .