SBC81613 Socket 370 All-in-One CPU Card Series User
’
s Manual
BIOS Configuration
58
When resources are controlled manually, assign each
system interrupt as one of the following types, depending on
the type of device using the interrupt:
1. Legacy ISA Devices compliant with the original PC AT bus
specification, requiring a specific interrupt (such as IRQ4
for serial port 1).
2. PCI/ISA PnP Devices compliant with the Plug and Play
standard, whether designed for PCI or ISA bus
architecture.
The default value is
“PCI/ISA PnP”
.
z
DMA Resources
When resources are controlled manually, assign each
system DMA channel as one of the following types,
depending on the type of device using the interrupt:
1.
Legacy ISA Devices compliant with the original PC AT
bus specification, requiring a specific DMA channel.
2.
PCI/ISA PnP Devices compliant with the Plug and Play
standard, whether designed for PCI or ISA bus
architecture.
The default value is
“PCI/ISA PnP”
.
z
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors
properly. This field allows you to set whether MPEG
ISA/VESA VGA Cards can work with PCI/VGA or not. When
enabled, a PCI/VGA can work with a MPEG ISA/VESA VGA
card. When it has
disabled, a PCI/VGA cannot work with a
MPEG ISA/VESA Card.
z
Assign IRQ For USB/VGA
Enable/Disable to assign IRQ for USB/VGA.
7.9 PC Health Status
This option configures the PCI bus system. All PCI bus systems
on the system use INT#, thus all installed PCI cards must be set
to this value.
